General

Real Time Clock …………………………………………………….. Built In
(Synchronised via NTP and the ASL iVENCS Control System)

Power Supplies

AC Supply Voltage .. 230V +/–10% RMS 50Hz AC / IEC320 inlet
European standard
AC Inrush Current …………………………………. 24.2A (Worst case)
AC Power Consumption ………………………………… 745VA (Max.)
(iPAM400 fully configured and all amplifier modules delivering
a 100V 1kHz sine wave into their rated resistive load)
DC Supply Voltage …………………………………………… 21 to 27.6V
(From nominal 24V lead acid battery pack)
Quiescent DC Current (no amplifiers, @ 24V supply) …… 450mA
Maximum DC Current Consumption ………. 6.25A per 1 x MX100
12.5A per 1 x MX200
25A per 1 x MX400
(21V supply, modules delivering a 100V 1kHz sine wave
into their rated resistive load)
Auxiliary DC Supply Output ……………………………… 21V to 38V

Analogue Audio Outputs and Amplification

Audio Outputs ………………………………………………….. 4 channels
Audio I/O Expansion Module (optional)
Audio Outputs ………………………… 4 x 0dBu low level outputs
Amplification …………………………………… Up to 4 100V amplifiers
Amplifier Outputs ….. A, B, C, and D outputs from each Amplifier
Standard Configurations3 ….. 1 x MX400 400W Amplifier Module
2 x MX200 200W Amplifier Module
4 x MX100 100W Amplifier Module
1 x 200W + 2 x 100W Amplifier Modules
Standby Amplification …………………………………………….. Internal
(Available for 100W and 200W amplifier modules)

Loudspeaker Line Surveillance

Loudspeaker Line Surveillance ………. AC or DC line surveillance
DC line surveillance ……………………………….. 10K Resistors
AC line surveillance ………………….. Active End of Line Units

Analogue Audio Inputs and Serial I/O

Microphone/Audio/Data Port…………………………………… 2 ports
Audio Input ……. balanced 0dBu/10K -20dBu max. sensitivity
Auxiliary DC Supply Output …………… 18-36V (500mA max)
Serial Interface …………………………………………………. RS485
For ASL microphones and BMB01 remote I/O units
Can also provide RS485 PIS Display Drive
Audio I/O Expansion Module (optional)
Audio Inputs ……… 2 x balanced 0 dBu / 14 kΩ impedance

Noise Control Features

Sample and Hold Ambient Noise Sensors ……………………… ANS
Connection using BMB01 Remote I/O Units
Night Volume Control ………………………………………… All outputs

Communication Interfaces
IP Network Connectivity ……….. 1 100baseT Ethernet RJ45 Port
USB Port …………………………….. 2 USB 2.0 (USB type A socket)
DVA and Software Download & Configuration Port
RS232 Serial Port11 ………………………………………………………… 1
VGA Video Port ……………………………………………………………… 1
Used with USB Keyboard for Bootstrap Operation and Config
Audio-CAN Port ……………………………………………….. 1 (Unused)

Environmental

Temperature Range
Storage ………………………………………………… −5°C to +50°C
Operating ……………………………………………… −5°C to +50°C
Humidity Range …………………………. 0% to 93% non-condensing
Ingress Protection ……………………………………………………… IP20
Vibration / Impact …………………… EN60068-2-6 / EN60068-2-75

Dimensions and Weight

Dimensions (H x W x D) ………………. 86mm x 439mm x 425mm
(Excluding handles) / 2U height, 19” rack mount
Weight
iPAM400 Mainframe only ……………………………………… 12kg
Max. Mainframe fitted with 4 x MX100 ………………….. 18.4kg

MX100

Output Power ………………………………………. 100W @ 100V RMS
Output Voltage and Input Sensitivity ……………………. 100V RMS
Into 100R load for 0dBu 1kHz input signal
Regulation ……………………………………………… Better than 1.5dB
(No load to full load)
Efficiency …………………………………………………………………. 80%
Quiescent Current ……………………………………… (@ 24V supply)
No signal ………………………………………………………….. 70mA
With one or two AEL units connected …….. 110mA (nominal)
With continuous surveillance signal ……….. 140mA (nominal)
Full Power Current …………………………………………………… 6.25A
(Worst case 21V battery supply)
Frequency Response …………………………. 100Hz – 18kHz, ±3dB
THD (@ 100V RMS output, full load) ……………… <0.5% @ 1kHz
Residual Noise………………….. Better than 80dB below full output
(A-weighted)
Dimensions (H x W x D) ………………….. 79mm x 79mm x 273mm
(Including connectors)
Weight ……………………………………………………………………. 1.6kg

MX200

Output Power ………………………………………. 200W @ 100V RMS
Output Voltage and Input Sensitivity ……………………. 100V RMS
Into 50R load for 0dBu 1kHz input signal
Regulation ……………………………………………… Better than 1.5dB
(No load to full load)
Efficiency …………………………………………………………………. 80%
Quiescent Current ……………………………………… (@ 24V supply)
No signal ………………………………………………………….. 70mA
With one or two AEL units connected …….. 110mA (nominal)
With continuous surveillance signal ……….. 140mA (nominal)
Full Power Current …………………………………………………… 12.5A
(Worst case 21V battery supply)
Frequency Response …………………………. 100Hz – 18kHz, ±3dB
THD (@ 100 V RMS output, full load) …………….. <0.5% @ 1kHz
Residual Noise………………….. Better than 80dB below full output
(A-weighted)
Dimensions (H x W x D) ………………… 79mm x 159mm x 273mm
(Including connectors)
Weight ……………………………………………………………………. 2.7kg

MX400
Output Power ………………………………………. 400W @ 100V RMS
Output Voltage and Input Sensitivity ……………………. 100V RMS
Into 25R load for 0dBu 1 kHz input signal
Regulation ……………………………………………… Better than 1.5dB
(No load to full load)
Efficiency …………………………………………………………………. 80%
Quiescent Current ……………………………………… (@ 24V supply)
No signal ………………………………………………………….. 90mA
With one or two AEL units connected …….. 125mA (nominal)
With continuous surveillance signal ……….. 150mA (nominal)
Full Power Current ……………………………………………………… 25A
(Worst case 21V battery supply)
Frequency Response …………………………. 100Hz – 18kHz, ±3dB
THD (@ 100V RMS output, full load) ……………… <0.5% @ 1kHz
Residual Noise………………….. Better than 80dB below full output
(A-weighted)
Dimensions (H x W x D) ………………… 79mm x 316mm x 273mm
(Including connectors)
Weight ……………………………………………………………………. 4.9kg

PRODUCT PART NUMBERS

iPAM400 ………………………………………………….Intelligent Amplifier Mainframe with Loudspeaker Line Monitoring
FPANEL-iPAM400 ……………………………………. iPAM400 Front Panel
iPA400……………………………………………………..Intelligent Amplifier Mainframe (without Line Monitoring)
FPANEL-iPAM400 …………………………………….iPA400 Front Panel
MX100 ………………………………………………….. 100W 100V Amplifier Module (125W using a 230V AC Mains Power Supply)
MX200 ………………………………………………….. 200W 100V Amplifier Module (250W using a 230V AC Mains Power Supply)
MX400 ………………………………………………….. 400W 100V Amplifier Module (500W using a 230V AC Mains Power Supply)
EOL10K…………………………………………………..10K Resistive DC End Of Line units
AEL01 …………………………………………………….IP40 AC End Of Line unit
AEL02 …………………………………………………….P65 AC End Of Line unit

OPTION PART NUMBERS

XIO01 ……………………………………………………………. Analogue Audio Expansion Input / Output Module (Factory Fit Option)
VIPA-TSS …………………………… Acapela Text To Speech Software Module (Factory Fit Option – with Specified Language)